imgalt

GOST 31273-2003

ГОСТ 31273-2003

Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms

Шум машин. Определение уровней звуковой мощности по звуковому давлению. Точные методы для заглушенных камер

Status: Not effective - Superseded. Registration information 2147-st dated December 29, 2014 (official website of Rosstandart); (IUS 9-2015)

The standard establishes a method for measuring sound pressure levels on a measuring surface in a muffled chamber with sound reflecting or sound absorbing to determine the sound power level or sound energy level of noise sources. The standard establishes the requirements for the test space and measuring instruments, as well as the method for determining the sound pressure level on the measuring surface, from which the sound power level or sound energy is calculated with the first degree of accuracy.

Стандарт устанавливает метод измерения уровней звукового давления на измерительной поверхности в заглушенной камере со звукоотражающим или со звукопоглощающим для определения уровня звуковой мощности или уровня звуковой энергии источников шума. Стандарт устанавливает требования к испытательному пространству и средствам измерений, а также способопределения уровня звукового давления на измерительной поверхности, по которому рассчитывают уровень звуковой мощности или звуковой энергии с первой степенью точности.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 6/15/2005

SKU: RUSS70534

Price: $526.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » II Industrial sanitation and occupational health » 5 Protection against mechanical vibrations » 5.2 Acoustic noise »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » I Legal and organizational basis of labor protection » 3 Organization of labor protection at enterprise » 3.3 Special assessment of working conditions »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.140 The impact of noise on humans »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.140 The impact of noise on humans »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements » 17.140.20 Noise from machinery and equipment »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.140 Acoustics and acoustic measurements » 17.140.20 Noise from machinery and equipment »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T3 Physics and Mechanics » T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »


The Document is Replaced With:

GOST ISO 3745-2014: Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precise methods for muffled and half-muffled chambers

As a Replacement Of:

GOST 12.1.024-81: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in anechoic room. Precision method

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.1.024-81: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in anechoic room. Precision method

GOST 17168-82: Octave and one-third-of-octave electronic filters

GOST 17187-81: Noise meters

GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements

GOST 27408-87: Noise. Methods for statistical processing of data in determination and control of machine emitted noise level

GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values

GOST 31252-2004: Noise of machines. Guidelines for the selection of method for the determination of sound power levels

The Document is Referenced By:

GOST 12.1.003-83: Noise. General safety requirements

GOST 12.2.042-2013: Occupational safety standards system. Machines and technological equipment for live-stock-raising and forage production. General safety requirements

GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements

GOST 31249-2004: Acoustics. Measurement and parametric description of spatial sound distribution curves in workrooms for evaluation of their acoustical performance

GOST 31252-2004: Noise of machines. Guidelines for the selection of method for the determination of sound power levels

GOST 32111.1-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST 32111.2-2013: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment

GOST 32112-2013: Acoustics. Determination of noise performance for air-terminal devices. Precision methods for anechoic rooms

GOST 32512-2013: Air curtains. General specifications

GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table

GOST EN 71-1-2014: Toys. Safety requirements. Part 1. Mechanical and physical properties

GOST EN 848-2-2013: Safety of woodworking machines. One side milling machines. Part 2. Single spindle milling machines with vertical upper arrangement of spindle

GOST IEC 60034-9-2014: Rotating electrical machines. Part 9. Noise limits

GOST IEC 61243-3-2014: Live working. Voltage detectors. Part 3: Two-pole low-voltage type

GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods

GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods

GOST R 52797.1-2007: Acoustics. Recommended practice for the design of low-noise workplaces containing machinery. Part 1. Noise control strategies

GOST R 52894.1-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 1. Non-ducted outdoor equipment

GOST R 52894.2-2007: Noise of machines. Sound power rating of air-conditioning and air-source heat pump equipment. Part 2. Non-ducted indoor equipment

GOST R 52895-2007: Noise of machines. Acceptance test code gear units for airborne sound

GOST R 52931-2008: Instruments for process monitoring and control. General specifications

GOST R 52987-2008: Acoustics. Determination of noise performance for air-terminal devices. Precision methods for anechoic rooms

GOST R 53032-2008: Noise of machines. Measurement of noise emitted by information technology and telecommunications equipment

GOST R 53148-2008: Rotating electrical machines. Noise limits

GOST R 53570-2009: Acoustics. Noise from shooting ranges. Part 1. Determination of acoustic characteristics of muzzle blast by measurement

GOST R 53575-2009: Loudspeakers. Methods of electroacoustic tests

GOST R 53576-2009: Microphones. Methods of measurement of electroacoustic characteristics

GOST R EN 12354-5-2012: Building acoustics. Estimation of acoustic performance of buildings from the performance of elements. Part 5. Sounds levels due to the service equipment

GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines

GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws

GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle

GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines

GOST R IEC 60704-1-2018: Household and similar electrical appliances. Test code for noise. Part 1. General requirements

STB EN 1870-10-2007: Safety of woodworking machines. Radial saw machines. Part 10. Automatic and semiautomatic rising blade machines

STB EN 1870-11-2007: Safety of woodworking machines. Radial saw machines. Part 11. Automatic and semiautomatic horizontal cross-cutting rising blade machines, (radial arm-sawing machines)

STB EN 1870-12-2007: Safety of woodworking machines. Radial saw machines. Part 12. Pendulum cross-cutting rising blade machines

STB EN 1870-15-2007: Safety of woodworking machines. Radial saw machines. Part 15. Multi blade cross-cutting machines with motorized and manual loading and/or unloading

STB EN 1870-16-2007: Safety of woodworking machines. Radial saw machines. Part 16. Bilateral miter machines for V-shaped cutting

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!