imgalt

GOST R 53932-2010

ГОСТ Р 53932-2010

Tube billet. General specifications

Заготовка трубная. Общие технические условия

Status: Effective - Introduced for the first time

This standard applies to tubular billets for the production of seamless pipes, including for the production of gas and oil pipes increased corrosion resistance

Настоящий стандарт распространяется на трубную заготовку, предназначенную для производства бесшовных труб, в т.ч. для производства газонефтепроводных труб повышенной коррозионной стойкости

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 11/12/2010

SKU: RUSS69701

Price: $462.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.50 Steel sheet products and semi-finished products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.60 Steel bars and wire rod »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V22 Rolled and shaped steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 20072-74: Heat-resistant steel

GOST 21120-75: Round and rectangular bars and billets. Ultrasonic testing

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 2590-2006: Round hot-rolled steel bars. Dimensions

GOST 26877-91: Metal products

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 380-2005: Common quality carbon steel. Grades

GOST 4543-71: Structural alloyed steel

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

The Document is Referenced By:

GOST 34636-2020: Pipe billet. General specifications

Your Recently Viewed Items and Featured Recommendations:

imgalt imgalt
Ensuring of wear resistance of products. Determination of energy-consumption while plastic deformation of materials
Language: English
Price: $217.00
imgalt
Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
Language: English
Price: $741.00
imgalt
Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!