GOST R 52376-2005
ГОСТ Р 52376-2005
|
|
Heat-resistant spiral-wound gaskets. Types. Main dimensions
Прокладки спирально-навитые термостойкие. Типы. Основные размеры
Status: Effective - Introduced for the first time
This standard applies to spiral-wound, heat-resistant gaskets with a sealing ring in the form of a wound spiral of V-shaped alternating layers of stainless steel tape and thermally expanded graphite filler or with a restrictive ring on the outside, inside or on both sides of the sealing ring for fittings, fittings and pipelines with sealing surfaces of versions 1-5, 8, 9 according to GOST 12815, nominal (conditional) pressure PN from 0.1 to 20.0 MPa (1 to 200 kgf / cm sq.), medium temperature from minus 253 degrees. C to plus 600 degrees. C, conditional passage (nominal size) DN from 10 to 3000 mm
Настоящий стандарт распространяется на спирально-навитые термостойкие прокладки с уплотнительным кольцом в виде навитой спирали из V - образных чередующихся слоев нержавеющей стальной ленты и наполнителя из терморасширенного графита или с ограничительным кольцом снаружи, внутри или с обеих сторон уплотнительного кольца для соединений арматуры, соединительных частей и трубопроводов с уплотнительными поверхностями исполнений 1-5, 8, 9 по ГОСТ 12815, номинальным (условным) давлением PN от 0,1 до 20,0 МПа (1 до 200 кгс/см кв.), температурой рабочей среды от минус 253 град. С до плюс 600 град. С, условным проходом (номинальным размером) DN от 10 до 3000 мм
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/20/2005
SKU: RUSS62971
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Standards for pipe fittings (TPA) »
13. Standards for basic components and parts of injection molding machines »
13.6 Gaskets »
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.4 Sealing materials, adhesives, sealants »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 28338-89: Nominal bores (nominal sizes)
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
The Document is Referenced By:
GOST 31901-2013: Pipeline valves for nuclear stations. General specifications
GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements
GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements
GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines
GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications
SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation
ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
