GOST 25.602-80
ГОСТ 25.602-80
|
|
Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
Расчеты и испытания на прочность. Методы механических испытаний композиционных материалов с полимерной матрицей (композитов). Метод испытания на сжатие при нормальной, повышенной и пониженной температурах
Status: Effective
The standard applies to polymer composite materials reinforced with continuous high-modulus carbon, boric, organic and other fibers whose structure is symmetrical relative to their median plane, and establishes a method of testing these materials for compression under normal (20 ° С) increased (up to 180 ° С) and low (minus 60 ° C) temperatures.
Стандарт распространяется на полимерные композиционные материалы, армированные непрерывными высокомодульными углеродными, борными, органическими и другими волокнами, структура которых симметрична относительно их срединной плоскости, и устанавливает метод испытания этих материалов на сжатие при нормальной (20 °С), повышенной (до 180 °С) и пониженной (минус 60 °С) температурах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
8/27/1980
SKU: RUSS60619
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.2 Polymer and composite materials »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.2 Testing of manufacturing products »
ISO classifier »
19 TESTS »
19.060 Mechanical test »
National standards »
19 TESTS »
19.060 Mechanical test »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T59 General methods and means of control and testing of products. Methods of statistical control of quality, reliability, durability »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified System of State Product Quality Management (ESGUKP) »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 12423-66: Plastics. Standard atmospheres for conditioning and testing specimens
GOST 14359-69: Plastics. Testing methods. General requirements of the methods of mechanical testing
GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications
GOST 17475-80: Countersunk head screws product grades A and B. Construction and dimensions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3128-70: Cylindrical pins unhardened. Construction and dimensions
GOST 380-94: Normal quality carbon steel
GOST 4651-82: Plastics. Compression test method
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5009-82: Abrasive cloth. Specifications
GOST 9013-59: Metals. Method of measuring Rockwell hardness
The Document is Referenced By:
GOST 28006-88: Structural carbonic strip. Specifications
GOST 32588-2013: Polymer composites. List of characteristics
GOST 32662-2014: Polymer composite components of the ventilating equipment. Specifications
GOST 32663-2014: Polymer composite components of the pumps for special purpose. Specifications
GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications
GOST 33369-2015: Fibre-reinforced thermosets for the strengthening and restoration of building structures. General specifications
GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications
GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures
GOST 33845-2016: Polymer composites. Method for determining fatigue characteristics under cyclic loading conditions
GOST R 50583-93: Polymer composites. List of properties
GOST R 54072-2010: Space technology. Polymer composites. List of properties
GOST R 54927-2012: Polymer composite sheet for special purpose. General technical requirements
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 58729-2019: Protections of ice hockey rinks. Technical specifications
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials
ODM 218.2.076-2019: Recommendations on the use of composite structures for areas with extreme temperature conditions (below minus 40 degrees Celsius and above plus 40 degrees Celsius)
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards
PNST 103-2016: Rehabilitation ramps. Slatted flooring from composite materials. Technical requirements and test methods
PNST 96-2016: Ice hockey boards from composite materials. Technical requirements and test methods
PNST 98-2016: Equipment for sports games. Volleyball pillar from composite materials. Technical requirements and test methods
RB 155-20: Safety Guide for the Use of Atomic Energy "Recommendations on the Procedure, Volume, Methods and Means of Control of Radioactive Waste to Confirm its Compliance with the Acceptance Criteria for Disposal"
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.