imgalt

GOST R 8.925-2016

ГОСТ Р 8.925-2016

State system for ensuring the uniformity of measurements. Certified reference materials of gas mixtures with Hydrogen, Nitrogen, Oxygen, Carbon Oxide, Carbon Dioxide, Methane, Propane, Hexane. Procedure of determining the metrological characteristics

Государственная система обеспечения единства измерений. Стандартные образцы состава газовых смесей на основе водорода, азота, кислорода, оксида углерода, диоксида углерода, метана, пропана, гексана. Методика определения метрологических характеристик

Status: Effective - Introduced for the first time. IUS 2-2017

This standard applies to standard samples of the composition of two-component and multicomponent gas mixtures in cylinders under pressure based on hydrogen, nitrogen, oxygen, carbon monoxide, carbon dioxide, methane, propane, hexane 1 and 2 digits and establishes a method for determining metrological characteristics with using hardware complexes that are working standards of the 1st category in accordance with GOST 8.578

Настоящий стандарт распространяется на стандартные образцы состава двухкомпонентных и многокомпонентных газовых смесей в баллонах под давлением на основе водорода, азота, кислорода, оксида углерода, диоксида углерода, метана, пропана, гексана 1-го и 2-го разрядов и устанавливает методику определения метрологических характеристик с помощью комплексов аппаратуры, являющихся рабочими эталонами 1-го разряда в соответствии с ГОСТ 8.578

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/1/2016

SKU: RUSS289099

Price: $283.00



imgalt

The Product is Contained in the Following Classifiers:

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 2 Technical basics of metrological support » 2.1 Reference materials and standard reference data »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »


The Document References:

GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 26703-93: Analytical gas chromatographs. Specifications and testing methods

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums

GOST ISO Guide 34-2014: General requirements for the competence of reference material producers

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements

Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"

Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)

Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments

PR 108-2010: Regulations on standards of units used in the state regulation of ensuring the uniformity of measurements

RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

The Document is Referenced By:

GOST R 8.976-2019: State system for ensuring the uniformity of measurements. Standard samples of the composition of calibration gas mixtures. General specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!