GOST R 8.921-2016
ГОСТ Р 8.921-2016
|
|
State system for ensuring the uniformity of measurements. Certified reference materials of natural gas magistral and substitute natural gas. Procedure of determining the metrological characteristics
Государственная система обеспечения единства измерений. Стандартные образцы состава природного газа магистрального и имитаторов природного газа. Методика определения метрологических характеристик
Status: Effective - Introduced for the first time. IUS 1-2017
The standard applies to standard samples of the composition of the main natural gas (GSO-PGM) and natural gas simulators (GSO-IPG) of the approved type of the 1st category (hereinafter referred to as standard samples) in cylinders under pressure and establishes a method for determining their metrological characteristics (hereinafter - certification ) using hardware-software chromatographic complexes that are part of the working standards of the 1st category in accordance with GOST 8.578. The standard is intended for use by the holders of working standards of the 1st category. The standard can also be used for certification of reference materials recognized by the Interstate Council for Standardization, Metrology and Certification (MCO), as well as reference standards for Euro-Asian cooperation of state metrological institutions (COOMET SO)
Стандарт распространяется на стандартные образцы состава магистрального природного газа (ГСО-ПГМ) и имитаторов природного газа (ГСО-ИПГ) утвержденного типа 1-го разряда (далее-стандартные образцы) в баллонах под давлением и устанавливает методику определения их метрологических характеристик (далее-аттестации) с помощью аппаратно-программных хроматографических комплексов, входящих в состав рабочих эталонов 1-го разряда в соответствии с ГОСТ 8.578. Стандарт предназначен для применения держателями рабочих эталонов 1-го разряда. Стандарт также может использоваться при аттестации стандартных образцов, признанных Межгосударственным советом по стандартизации, метрологии и сертификации (МСО), а также стандартных образцов евро-азиатского сотрудничества государственных метрологических учреждений (СО КООМЕТ)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
9/1/2016
SKU: RUSS289095
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
2 Technical basics of metrological support »
2.1 Reference materials and standard reference data »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T6 Classification system, coding and technical and economic information »
T62 Information, library and publishing »
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 20060-83: Combustible natural gases. Methods for determining water vapor content and dew point of moisture
GOST 26703-93: Analytical gas chromatographs. Specifications and testing methods
GOST 30319.1-2015: Natural gas. Methods of calculation of physical properties. General statements
GOST 31370-2008: Natural gas. Sampling guidelines
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST 8.578-2014: State system for ensuring the traceability of measurements. State hierarchy scheme for measuring instruments of the content of components in gaseous mediums
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
Order 970: Administrative Regulations on rendering by the Federal Agency on Technical Regulation and Metrology of the state service on type approval of certified reference materials or type of measuring instruments
RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
The Document is Referenced By:
GOST 34893-2022: Natural gas. Performance evaluation of analytical systems
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
