GOST 34233.11-2017
ГОСТ 34233.11-2017
|
|
Vessels and apparatus. Norms and methods of strength calculation. Method of strength calculation of shells and heads according to weld misalignment, angular misalignment and shell nonroundness
Сосуды и аппараты. Нормы и методы расчета на прочность. Метод расчета на прочность обечаек и днищ с учетом смещения кромок сварных соединений, угловатости и некруглости обечаек
Status: Effective - Introduced for the first time. IUS 3-2018
This standard establishes the norms and methods for calculating the strength of shells, convex bottoms and covers of vessels and apparatus operating under static and low-cycle loads under internal or external pressure, taking into account deviations (displacement of edges of welded joints, angularity, general and local non-roundness) regulatory documentation (technical specifications or technical requirements for the manufacture of vessels and apparatus), shown the geometric shape of structural elements and their connections. This standard is intended to determine the possibility of further operation of vessels and devices in the detection of these inconsistencies when performing technical diagnostics, industrial safety expertise
Настоящий стандарт устанавливает нормы и методы расчета на прочность обечаек, выпуклых днищ и крышек сосудов и аппаратов, работающих в условиях статических и малоцикловых нагрузок под внутренним или наружным давлением, с учетом отклонений (смещения кромок сварных соединений, угловатости, общей и локальной некруглостей) от требований нормативной документации (технических условий или технических требований на изготовление сосудов и аппаратов), предъявляемых геометрической форме конструктивных элементов и их соединений. Настоящий стандарт предназначен для определения возможности дальнейшей эксплуатации сосудов и аппаратов при выявлении указанных несоответствий при выполнении технического диагностирования, экспертизы промышленной безопасности
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/14/2017
SKU: RUSS286805
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
71 Chemical industry »
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.9 Equipment for centrifugal and gravity separation of liquid and non-uniform systems »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
National standards »
71 CHEMICAL INDUSTRY »
71.120 Equipment for chemical industry »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.200 Equipment for oil refining, oil products and natural gas »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
The Document References:
GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 34233.2-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
The Document is Referenced By:
Decision 18: About the Program for the development (amendment, revision) of interstate standards, the application of which on a voluntary basis ensures compliance with the technical regulations of the Customs Union "On the safety of equipment operating under excessive pressure" (TR TS 032/2013), and interstate standards containing the rules and methods of research (testing) and measurements, including the rules for sampling, necessary for the application and implementation of the requirements of the technical regulations of the Customs Union "О pretensioners equipment operating under excess pressure "(TR CU 032/2013) and of conformity assessment of technical regulation objects
Decision 96: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of technical regulations of the Customs Union "On safety of equipment operating under excess pressure" (TR TS 032/2013), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and
GOST 34233.10-2017: Vessels and apparatus. Norms and methods of strength calculation. Vessels and apparatus working with hydrogen sulfide media
GOST 34233.1-2017: Vessels and apparatus. Norms and methods of strength calculation. General requirements
GOST 34233.12-2017: Vessels and apparatus. Norms and methods of strength calculation. Requirements for the form of submission of strength calculations performed on a computer
GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections
GOST 34233.6-2017: Vessels and apparatus. Norms and methods of strength calculation. Strength calculation with low-cycle loads
GOST 34233.9-2017: Vessels and apparatus. Norms and methods of strength calculation. Column type apparatus
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34891.2-2022: Refrigeration and heat pump systems. Safety and environmental requirements. Part 2. Design, construction, testing, labelling and documentation
GOST R 58622-2019: The main pipeline transport of oil and oil products. Methodology for assessing the strength, stability and durability of a vertical steel tank
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.