Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

«
1
…
40
41
42
43
44
45
»

High-temperature thermal insulation. Thermal technological process.

Aluminium wrought alloys. Over burning metallographic examination.

Welder certification rules.

Quick-cutting steel types. Heat treatment. Technical requirements, standard techniques and procedures.

Welded steel structures. Technological requirements.

Titanium alloys castings. Technical requirements.

Die-blanks with pusher plate for thermoplastic pressure die casting. Design and dimensions (restriction of GOST 22062-76).

Die-blanks with removal plate for thermoplastic pressure die casting. Design and dimensions (restriction of GOST 22063-76).

Die-blanks with removal plate and pusher plate for thermoplastic pressure die casting. Design and dimensions (restriction of GOST 22064-76).

Plate-blanks for thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22065-76).

Plate-blanks for fastening of thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22066-76).

Cruciform plate-blanks for die takeout for thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22067-76).

Rectangular plate-blanks for die takeout for thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22068-76).

Support cruciform plate-blanks for thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22069-76).

Support rectangular cruciform plate-blanks for thermoplastic materials pressure die casting. Design and dimensions (restriction of GOST 22070-76).

Struts for thermoplastic combination die under pressure. Construction and dimensions (restrictions imposed by GOST 22071-76).

Guiding columns of moulds to mould thermoplastic materials under pressure. Design and dimensions (limitation under GOST 22072-76).

Guide bushing of moulding tools to cast thermoplastic materials under pressure. Construction and dimensions (limitation under GOST 22073-76).

Spigots of press-tools to cast thermoplastic materials under pressure. Construction and dimensions (limitation under GOST 22075-76).

Sprue bushings for compression moulds to cast thermoplastic materials under pressure. Construction and dimensions (limitation under GOST 22077-76).

Central bushings for press-tools to cast thermoplastic materials under pressure. Construction and dimensions (limitation under GOST 22078-76).

Shanks of thermoplastic material injection moulds. Design and dimensions (restriction as per GOST 22079-76).

Die-blanks, part-blanks and press mould parts for thermoplastic pressure die casting. Specification.

Lacquer coating for metal surfaces. Typical technological processes.

Highly consistent wear-resistant coatings, applied in vacuum on cutting and measuring tools. Technical requirements and typical technological process.

Cylindrical hand reamers from 0,8 up to 2,9 mm in diameter. Design and dimensions.

Cylindrical hand reamers from 8 up to 50 mm in diameter. Design and dimensions

Cylindrical hand reamers with helical grooves from 1 up to 2,9 mm in diameter. Design and dimensions

Cylindrical hand reamers with helical grooves from 3 up to 50 mm in diameter. Design and dimensions.

Cylindrical hand reamers with holes sense from 3 up to 6 mm in diameter. Design and dimensions.

Cylindrical single-tooth machine reamers from 0,3 up to 0,95 mm in diameter. Design and dimensions.

Solid machine reamers from 1 up to 2,9 mm in diameter and cylindrical shanks. Design and dimensions.

Solid machine reamers from 3 up to 9,9 mm in diameter and cylindrical shanks. Design and dimensions.

Solid machine reamers from 10 up to 32 mm in diameter and cylindrical shanks. Design and dimensions.

End machine reamers from 3 up to 9 mm in diameter and cylindrical shanks. Design and dimensions.

End machine reamers from 10 up to 32 mm in diameter and cylindrical shanks. Design and dimensions.

Cylindrical machine reamers with helical grooves from 1 up to 2,9 mm in diameter. Design and dimensions.

Cylindrical machine reamers with helical grooves from 3 up to 9,9 mm in diameter. Design and dimensions.

Machine reamers with helical grooves from 10 up to 32 mm in diameter with cylindrical shank. Design and dimensions.

Conical reamers with 1:50 conicity and diameter from 0,5 up to 20 mm with cylindrical shank. Design and dimensions.

Conical reamers with 1:10 conicity and diameter from 4 up to 20 mm with cylindrical shank. Design and dimensions.

Reamers for conical thread of 1:16 conicity and diameter 1/16 "up to I" with cylindrical shank. Design and dimensions.

Hand conical reamers with helical grooves from 3 up to 10 mm in diameter. Design and dimensions.

Conical machine reamers with 1:100 conicity and diameter from 0,3 up to 0,95 mm with cylindrical shank. Design and dimensions.

Conical machine finishing reamers with 1:30 conicity and diameter from 13 up to 50 mm with cylindrical shank. Design and dimensions.

Conical machine reamers for Morse cone with cylindrical shank. Design and dimensions.

Cylindrical reamers from 0,3 up to 50 mm in diameter. Required dimensions.

Standards for the number of auxiliary workshops of primary and secondary production ( controllers, progress men, storekeepers, transport workers ).

«
1
…
40
41
42
43
44
45
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!