Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

«
1
…
14
15
16
17
18
19
20
…
45
»

Extension Cords. Design and dimensions

End adapters. Design and dimensions

Interchangeable heads with an open-end. Construction and dimensions.

Replaceable swivel heads with hex. Design and dimensions

Inserts for screwdriver-drill. Design and dimensions

Inserts for screws with cross recess according to GOST10753-64. Design and dimensions

Inserts for screwdriver-drill. Design and dimensions

Inserts for recessed-head screws according to GOST 10753-64. Construction and dimensions.

Inserts for screwdrivers. Design and dimensions

Screwdrivers for crosshead screws in accordance with GOST 10753-64. Design and dimensions

Screwdriver-drill. TYPE-1. Design and dimensions

Screwdriver-drill. Type 11. Design and dimensions.

Screwdriver calibrated with MKR from 0.05 to 0.4 kgf · m. Design and dimensions

Screwdriver calibrated with MKR from 0.2 to 1.6 kgf · m. Design and dimensions

Universal Screwdriver with Collet Chuck. Design and dimensions

Universal screwdriver with a cam leash. Design and dimensions

Interchangeable inserts for slotted screws. Construction and dimensions.

Interchangeable inserts for cross-recessed screws in accordance with GOST 10753-64. Construction and dimensions.

Interchangeable inserts for hexagonal-headed nuts and bolts. Construction and dimensions.

Inserts replaceable for screws with straight slot. Design and dimensions

Interchangeable inserts for cross-recessed screws in accordance with GOST 10753-64. Construction and dimensions.

Interchangeable inserts for hexagonal-headed nuts and bolts. Construction and dimensions.

steep-end mill (omega equal to 55 degrees) of high-speed steels for processing of high-strength steels and titanium alloys. Design and dimensions.

Universal head to milling machines for milling of grooves in steeply end mills with omega equal to 55 degrees. Design and dimensions.

Self-pushing adjustable roller burnishers for parallel through holes 6-12 mm in diameter. Design and dimensions.

OST 16 0.800.699-79

Foreign explosion-proof electrical equipment. Selection and usage of foreign electrical equipment for explosive installations. Main provisions.

OST 16-0.503.001-79

Electric Insulating Materials. Classification.

OST 16-0.523.008-79

Pneumatic time relays. General specifications.

OST 16-0.526.006-79

Magnetic starters of ПMM-Д, ПMMС-Д series. Specifications.

OST 16-0.529.026-79

Chemical secondary power sources for export. General technical requirements.

OST 16-0.535.040-79

Amalgamate fluorescent lamps. Specifications.

OST 16-0.535.044-79

Ceiling fixtures with two and more luminescent lamps for general lighting of public places. Specifications.

OST 16-0.536.003-79

Electromagnetic explosion-proof starters of ПВИ series. General specifications.

OST 16-0.539.083-79

Electric welding equipment.. Scope and content of technical requirements to be included in specification.

OST 16-0.684.351-79

Special equipment for winding sections of capacitors. Bobbin holders. Technical requirements.

OST 16-0.684.352-79

Special equipment for winding sections of capacitors. Winding mandrels. Technical requirements.

OST 16-0.684.374-79

Electric welding equipment. Taper washers. Design and dimensions.

OST 16-0.684.389-79

ОЕСТПП. Special technological equipment. Rubber spider coupling. Design. Basic parameters and dimensions.

OST 16-0.684.390-79

ОЕСТПП. Special technological equipment. Roller clutches. Design. Basic parameters and dimensions.

OST 16-0.684.391-79

ОЕСТПП. Special technological equipment. Coupling with V-shaped fine teeth. Design and dimensions.

OST 16-0.684.396-79

Primary chemical power sources. Riveted joints. Shapes and dimensions of locking heads and bearing surfaces. Choice of the lengths of rivets. Design and dimensions.

OST 16-0.684.397-79

Current sources. Chemical primary options of mounting radio-frequency component with mastic. Designs and dimensions.

OST 16-0.684.398-79

Fastening of flexible metal sleeves to blocks and shields. Design and dimensions

OST 16-0.686.003-79

Unified system for technological preparation of production. Sealed alkaline nickel-cadmium batteries. Typical technological process.

OST 16-0.686.067-79

ОЕСТПП. Power capacitors. Reinforced insulators. Soldering components to insulator. Typical technological process.

OST 16-0.686.073-79

Industry-based unified production planning system. Equipment for assembly of discharge lamps. Design and dimensions.

OST 16-0.686.100-79

Procedures on scientific-research and experimental-design technological process and technological equipment development and their transfer to industrial production.

OST 16-0.686.712-79

Micaceous Insulating Materials. Method for determination of components mass fraction.

«
1
…
14
15
16
17
18
19
20
…
45
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!