Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 1-51682-83
OST 1-51682-83
Two-point struts. Construction and dimensions.
OST 1-51683-83
OST 1-51683-83
Racks. Design and dimensions
OST 1-51684-83
OST 1-51684-83
Flange struts. Construction and basic dimensions.
OST 1-51685-83
OST 1-51685-83
Insert-type struts. Construction and dimensions.
OST 1-51686-83
OST 1-51686-83
Hinge bearing. Design and dimensions
OST 1-51687-83
OST 1-51687-83
Reference jack. Construction and dimensions.
OST 1-51688-83
OST 1-51688-83
Bearings with journal and lock. Design and dimensions.
OST 1-51689-83
OST 1-51689-83
Bearings with journal and pin. Design and dimensions.
OST 1-51690-83
OST 1-51690-83
Bearings with journal and tangential clamp.
OST 1-51691-83
OST 1-51691-83
Bearings with journal. Design and dimensions.
OST 1-51692-83
OST 1-51692-83
Foundation bolts. Design and dimensions
OST 1-51693-83
OST 1-51693-83
Base anchor nuts. Design and dimensions
OST 1-51694-83
OST 1-51694-83
Bolts with a shaped head. Design and dimensions
OST 1-51695-83
OST 1-51695-83
Devices for aggregate assembling. Parts and units of device carcasses. General specifications.
OST 1-52607-83
OST 1-52607-83
Solid hard alloy machine-hand taps with diameter of 3 to 10 mm for hard materials. Design and dimensions.
OST 1-52608-83
OST 1-52608-83
Machine-manual taps, equipped with carbide plates with a diameter of 10 to 20 mm for hard-to-machine materials. Design and dimensions
OST 1-52609-83
OST 1-52609-83
Machine-manual carbide taps with diameters of 12 and 16 mm for difficult-to-machine materials. Design and dimensions
OST 1-52610-83
OST 1-52610-83
Solid hard alloy machine-hand taps with diameter of 3 to 10 mm for titanium alloys. Design and dimensions.
OST 1-52611-83
OST 1-52611-83
Machine-manual taps, equipped with carbide plates, with a diameter of 10 to 20 mm for titanium alloys. Design and dimensions
OST 1-52612-83
OST 1-52612-83
Machine-manual machine-taps with a diameter of 12 and 16 mm for titanium alloys. Design and dimensions
OST 1-52613-83
OST 1-52613-83
Machine-manual carbide taps for difficult-to-machine materials and titanium alloys. Executive Sizes
OST 1-52614-83
OST 1-52614-83
Scissors brackets curved, for cutting metal, right and left. Design and dimensions
OST 1-52615-83
OST 1-52615-83
Shears for sheet material. Design and dimensions.
OST 1-52616-83
OST 1-52616-83
Lightweight metal cutting left and right shears. Design and dimensions.
OST 1-52617-83
OST 1-52617-83
Curved reinforced right and left shears. Design and dimensions.
OST 1-52618-83
OST 1-52618-83
Left and right reinforced shears for metal cutting. Design and dimensions
OST 1-52619-83
OST 1-52619-83
Hand lever right and left shears Design and dimensions.
OST 1-52620-83
OST 1-52620-83
Double-joint scissors for metal cutting. Design and dimensions
OST 1-52621-83
OST 1-52621-83
Passing coppersmith shears for cutting metal. Design and dimensions.
OST 1-52622-83
OST 1-52622-83
Coppersmith shears for cutting metal. Design and dimensions.
OST 1-52623-83
OST 1-52623-83
Edge cutting knife. Design and dimensions.
OST 1-52624-83
OST 1-52624-83
Deburring Knife. Technical requirements
OST 1-52625-83
OST 1-52625-83
Head hammers vykolotochnyh straight. Design and dimensions
OST 1-52626-83
OST 1-52626-83
Heads of curved set hammers. Construction and dimensions.
OST 1-52627-83
OST 1-52627-83
Heads of crowfoot hammers. Construction and dimensions.
OST 1-52628-83
OST 1-52628-83
Heads of crowfoot barrel-shaped hammers. Construction and dimensions.
OST 1-52629-83
OST 1-52629-83
Spherical hammer head. Design and dimensions
OST 1-52630-83
OST 1-52630-83
Heads of planishing hammers with round and square dies. Construction and dimensions.
OST 1-52631-83
OST 1-52631-83
Head of a planishing hammer with round dies. Construction and dimensions.
OST 1-52632-83
OST 1-52632-83
Heads of round planishing hammers. Construction and dimensions.
OST 1-52633-83
OST 1-52633-83
Heads of ironing hammers with shaped dies. Design and dimensions
OST 1-52634-83
OST 1-52634-83
Heads of planishing hammers with radial dies. Construction and dimensions.
OST 1-52635-83
OST 1-52635-83
The head of the single-pointed ironing hammer with a square flat striker. Design and dimensions
OST 1-52636-83
OST 1-52636-83
Head of a single-end planishing hammer with a round radial die. Construction and dimensions.
OST 1-52637-83
OST 1-52637-83
Head of a ballast hammer with sharp edges. Construction and dimensions.
OST 1-52638-83
OST 1-52638-83
Head of a barrel-shaped hammer for fettling. Construction and dimensions.
OST 1-52639-83
OST 1-52639-83
Combined hammers. Design and dimensions
OST 1-52640-83
OST 1-52640-83
duralumin round hammers. Design and dimensions.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!