Documents by Year

1930s (86)

1940s (117)

1950s (2)

1960s (844)

1970s (20003)

1980s (20684)

1990s (2216)

2000s (520)

2010s (44)

2020s (1)

2020 (1)

OST

1974

«
1
…
10
11
12
13
14
15
16
…
46
»

OST 11-488.002-74

Mounting blocks of SM3 (СМ3) type. Construction and dimensions.

OST 11-802.000-74

Micromodules for stacked construction. Housings. Dimensions.

OST 11-OD0.296.001-74

Stimulated emission amplifiers of optical spectrum on solid body. Stationary cooling unit. Basic construction.

OST 11-OD0.331.004-74

Electronic amplifier, rectifier, and oscillator tubes for widely used devices with anode dissipated power above 25 W intended as replacement parts for equipment of wide application. General specifications.

OST 11-OD0.331.006-74

Electronic amplifier, rectifier, and oscillator tubes for widely used devices with anode dissipated power up to 25 W. Standard form for technical requirements.

OST 11-OD0.331.007-74

Electronic amplifier, rectifier, and oscillator tubes for widely used devices with anode dissipated power above 25 W. Standard form for technical requirements.

OST 11-OD0.334.003-74

Gas discharge devices for general-purpose units. Specification standard form.

OST 11-OD0.334.004-74

Gas discharge devices, intended for delivery as spare parts for general-purpose units. General specifications.

OST 11-OD0.335.020-74

Sending electron-beam devices. Dissector tubes. Basic designs.

OST 11-OD0.335.023-74

Photo cells for devices of general use. Standard form of technical conditions

OST 11-OD0.352.008-74

Electron-beam devices. Cathode-heating units for special purpose devices. General technical conditions

OST 11-OD0.732.001-74

Ceramic-metal lamps and microwave modules. Solder parts. Design and dimensions

Flitch for manufacturing softwood and hardwood

Tolerances and allowances in wood processing. Tolerances for location of the axes of holes

Aluminium alloy rivet connection of assembled details and nodes by applying riveting machine hammers. Standard techniques and procedures.

Aluminium alloy rivet joint of parts and nodes with manual riveting press. Standard techniques and procedures.

Aluminium alloy connection of assembled details and nodes by applying fixed equipment mould pressing. Standard techniques and procedures.

Adhesive bonding of tail sections and main rotor blades for MI-8 (МИ-8) model. Standard techniques and procedures.

Cooling mixtures. Composition. Preparation rules.

Lubricating-cooling fluid (LCF) application. Methods and techniques.

Induction hardening of RDTT casing shells made of high-strength steels. Typical technological process.

Loop transfer at laying off and template works. Typical technological process.

Marking and cutting of vinyl chloride tags. Typical operations technological process.

Oxy-acetylene welding. Filler wires, fluxes and gases. Consumption rates

Shells and cylindrical shell of РДТТ casing, subjected to quenching using induction heating. Basic requirements for technological design.

Stamping precision blanks on high-speed hammers. Typical process

Radiographic quality control of soldered pipe joints. Control schemes

Production of negatives and slides. Typical technological process.

Production of stencils by engraving on form-milling machines with pantograph. Typical technological process.

Application of template made by decal on product. Typical technological process.

Production of stencils by silk screening and decalcomania. Typical technological process.

Production of stencils with deep and prominent marks by chemical etching. Typical technological process.

Production of stencils by photometallography. Typical technological process.

Preparation of light-sensitive emulsion. Typical technological process.

Investment casting of parts made of Aluminium and magnesium alloys. Typical technological process.

Typical operation of technological process termination electrical wires in tags .Main provisions.

Sealing of wires into lugs 5832A, 5833A, 5834A, 5835A with cold compression followed by soldering. Typical operation of technological process.

Sealing of wires into lugs 5836A with cold compression on cable core and insulation. Typical operation of technological process.

Sealing of wires into lugs 5836A with cold compression followed by soldering. Typical operation of technological process.

Sealing of wires into lugs 5837A, 5838A, 6739A with cold compression followed by soldering. Typical operation of technological process.

Sealing of wires into lugs 6091S54, 6097S54 and special lugs with cold compression on cable core. Typical operation of technological process.

OST 1-4-1559-74

Seal the wires in the special ends with cold compression on the core and on the insulation. Typical process operation

Seal the wires in the special ends with cold compression on the core and on the insulation. Typical process operation

Sealing of wires into special lugs with cold compression followed by soldering. Typical operation of technological process.

Typical operation of the process of sealing electrical wiring in the lugs. Main provisions

Sealing of wires into lugs 6383A with soldering. Typical operation of technological process.

Sealing of wires into lugs 6384A, 6385A with soldering. Typical operation of technological process.

Sealing of wires into lugs 6384A, 6385A with cold compression followed by soldering. Typical operation of technological process.

«
1
…
10
11
12
13
14
15
16
…
46
»

All Codes and Regulations

Codes	MGSN	OND	PR	SNiP	TU
Decisions	MI	ONTP	PUE	SN	VNTP
Decrees	MR	Orders	RD	SO	VPPB
GN	MSN	OST	RDS	SP	VRD
GOST	MSP	Other norms	Resolutions	ST SEV	VSN
Instructions	MUK	PB	RMU	STO
Laws	MU	PNAE	R	TI
Letters	ND	PND	RSN	TOI
MDK	NPB	POT	RTM	TR EAES
MDS	NP	PPB	SanPiN	TSN

All Categories

Construction (Max)	Highways (Max)	National Standards for KGS (State Standards Classification)	Power industry	Standards for pipe fittings (TPA)
Construction Price Formation	ISO classifier	National Standards for OKSTU	Projects of works (PPR) on bridges	Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union)	National standards	Organization Standards	PromExpert	Welding regulations

©RGTT 2016. All Rights Reserved.

Send us a message

Leave your message in the form below, and we will write back by e-mail!