Documents by Year
1930s (86)
1940s (117)
1950s (2)
1960s (844)
1970s (20003)
1980s (20684)
1990s (2216)
2000s (520)
2010s (44)
2020s (1)
Other (744)

OST

OST 1-41862-79
OST 1-41862-79
Installation of docking ribbon in the groove profile or by groove on the profile and on the window panels and fastening by eccentric locks with clip. Typical operation of technological processes.
OST 1-41863-79
OST 1-41863-79
Installation of a small permanent partitions (rim) by slots on the frame rods and fastening by bolts. Typical operation of technological processes.
OST 1-41864-79
OST 1-41864-79
Installation of the rim on the frame brackets and fastening by screws. Typical operation of technological processes.
OST 1-41865-79
OST 1-41865-79
Installation of permanent partition to the carcass bracket and on the floor and fastening by bolts. Typical operation of technological processes.
OST 1-41866-79
OST 1-41866-79
Installation of a large permanent partition by slots on the rods of carcass and fastening by bolts. Typical operation of technological process.
OST 1-41867-79
OST 1-41867-79
Installation of permanent partition by dowels in the slots of the bracket and on the floor rails and fastening by bolts. Typical operation of technological processes.
OST 1-41868-79
OST 1-41868-79
Installation of permanent partition by ribs or dowels in the slots of the rim and the floor panel and fastening by bolts. Typical operation of technological processes.
OST 1-41869-79
OST 1-41869-79
Installation of permanent strengthened partition by ribs or dowels in the slots of the rim and on the floor panels and fastening by bolts. Typical operation of technological processes.
OST 1-41870-79
OST 1-41870-79
Installation of permanent partition on the tray and on the floor or on the tray, on the floor by end face or on the end face of preously installed partition and fastening by bolts. Typical operation of technological processes.
OST 1-41871-79
OST 1-41871-79
Installation of arch to the carcass and fastening of bolts and screws. Typical technological operation.
OST 1-41872-79
OST 1-41872-79
Installation of the longitudinal partition on the floor between the transverse partitions and fastening by bolts and screws. Typical operation of technological processes.
OST 1-41873-79
OST 1-41873-79
Installation of the longitudinal partition on the floor between the two partitions and on the end wall of the third portion and on the carcass brackets and fastening by bolts and screws. Typical operation of technological processes.
OST 1-41874-79
OST 1-41874-79
Installation of removable partition by dowels into the grooves by bracket on the luggage shelf and on the floor panels and fastening by bolts. Typical operation of technological processes.
OST 1-41875-79
OST 1-41875-79
Installation of lintel between the partitions and corners on the carcass brackets and fastening by bolts and screws. Typical operation of technological processes.
OST 1-41876-79
OST 1-41876-79
Installation of lintel to the carcass by dowels and fastening by bolts. Typical operation of technological processes.
OST 1-41877-79
OST 1-41877-79
Installation of lintel to the carcass between the partitions by grooves on the dowels and fastening by bolts and wood screws. Typical operation of technological processes.
OST 1-41878-79
OST 1-41878-79
Installation of lintel with flanges between the partitions and to the ceiling panel and fastening by bolts and screws. Typical operation of technological processes.
OST 1-41879-79
OST 1-41879-79
Installation of cornice (lintels) by dowels into the holes of corners and profiles on the corners of the partition and fastening by bolts. Typical operation of technological processes.
OST 1-41880-79
OST 1-41880-79
Installation of cornice with light scoreboard and flanges between the partitions and the ceiling panels and fastening bolts. Typical operation of technological processes.
OST 1-41881-79
OST 1-41881-79
Installation of cornice by shackle on the carcass and fastening by bolts. Typical operation of technological processes.
OST 1-41882-79
OST 1-41882-79
Installation of footwell on the floor to the partition and fastening bolts, screws and wood screws.Typical operation of technological processes.
OST 1-41883-79
OST 1-41883-79
Installation of luggage rack by brackets to the carcass and fastening of bolts. Typical operation of technological process.
OST 1-41884-79
OST 1-41884-79
Installing the luggage rack on the frame and fastening with bolts and screw-nuts. Typical process operation
OST 1-41885-79
OST 1-41885-79
Installation of luggage rack by brackets to the carcass and the previously set of shelf and fastening of bolts and locks. Typical operation of technological process.
OST 1-41886-79
OST 1-41886-79
Installation of luggage rack by brackets to the carcass and the previously set of shelf and fastening of bolts and locks. Typical operation of technological process.
OST 1-41887-79
OST 1-41887-79
Installation of handrail at luggage rack and fastening with bolts. Typical operation in the technological process.
OST 1-41888-79
OST 1-41888-79
Installation of a finishing profile on the carcass, panel and fastening by bolts. Typical operation of technological processes.
OST 1-41889-79
OST 1-41889-79
Installation of decorative profile in the hole between the window panes. Typical operation of technological process.
OST 1-41890-79
OST 1-41890-79
Installation of decorative grid on the carcass and fastening by bolts. Typical operation of technological process.
OST 1-41891-79
OST 1-41891-79
Installation of spring grating or jumpers in the groove of profile. Typical operation of technological processes.
OST 1-41892-79
OST 1-41892-79
Installation of the ventilation grille with screws into the holes of the frame and fixing with nuts. Typical process operation
OST 1-41893-79
OST 1-41893-79
Installation of ventilation grille by flange for presser feet and on the cut out of box and fastening by bolts. Typical operation of technological process.
OST 1-41894-79
OST 1-41894-79
Installation of saloon doors and closet loops by the loops on the partition and fastening by bolts, screws or screws. Typical operation of technological process.
OST 1-41895-79
OST 1-41895-79
Installation of doors by hinges, hinges on the partition and fastening with bolts and locks. Type DZUS. Typical process operation
OST 1-41896-79
OST 1-41896-79
Installation of folding saloon door or toilet by loop on the partition and fastening by screws or wood screws. Typical operation of technological processes.
OST 1-41897-79
OST 1-41897-79
Installation of shutter door or cupboard bosses into the profile groove. Typical operation of technological processes.
OST 1-41898-79
OST 1-41898-79
Installation of facing edging on doorways or partitions and fastening by screws or wood screws. Typical operation of technological processes.
OST 1-41899-79
OST 1-41899-79
Installation of a pocket and clamp under the hatchet and bolting. Typical process operation
OST 1-41900-79
OST 1-41900-79
Installation hatchet in a pocket and fastening by collar. Typical operation of technological processes.
OST 1-41901-79
OST 1-41901-79
Installation of luggage net and fastening by carbines to hinges of the carcass. Typical operation of technological process.
OST 1-41902-79
OST 1-41902-79
Installation of buffet on the floor rails and fastening by bolts. Typical operation of technological process.
OST 1-41903-79
OST 1-41903-79
Buffet Installation on the floor between the partition and the previously set rack and to the housing and fastening by bolts. Typical operation of technological process.
OST 1-41904-79
OST 1-41904-79
Installation of buffet by slots on dowels or by dowels into the slots on the floor panel and fastening by bolts. Typical operation of technological process.
OST 1-41905-79
OST 1-41905-79
Installation of the lower and upper parts of buffet and the cover table to the carcass or previously installed part of the buffet and fastening by bolts. Typical operation of technological processes.
OST 1-41906-79
OST 1-41906-79
Installation of table basic on the table and between the partitions to the face panel and fastening by bolts. Typical operation of technological processes.
OST 1-41907-79
OST 1-41907-79
Installation of a cover on the base of the table and between the partitions and fastening by bolts and screws. Typical operation of technological processes.
OST 1-41908-79
OST 1-41908-79
Installation of removable of table cover by grooves on the stops or hinges by balls into the grooves of buffet rack. Typical operation of technological processes.
OST 1-41909-79
OST 1-41909-79
Installation of the table cover by slots on the supports and profiles of struts buffet and fastening by screws. Typical operation of technological processes.

All Codes and Regulations

Codes MGSN OND PR SNiP TU
Decisions MI ONTP PUE SN VNTP
Decrees MR Orders RD SO VPPB
GN MSN OST RDS SP VRD
GOST MSP Other norms Resolutions ST SEV VSN
Instructions MUK PB RMU STO
Laws MU PNAE R TI
Letters ND PND RSN TOI
MDK NPB POT RTM TR EAES
MDS NP PPB SanPiN TSN

All Categories

Construction (Max) Highways (Max) National Standards for KGS (State Standards Classification) Power industry Standards for pipe fittings (TPA)
Construction Price Formation ISO classifier National Standards for OKSTU Projects of works (PPR) on bridges Technical Supervision
Evidence base (TR CU, Technical Regulation of the Customs Union) National standards Organization Standards PromExpert Welding regulations

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!